New NetCloud SASE service simplifies zero trust security and traffic optimization Learn more
DOWNLOAD PAGE TO PDF

Data Sheet:

RX30 Series

2023 - 08 - 24

The RX30 Series managed accessories are compact and ruggedized for use with the R1900 Series 5G Ruggedized Router. They can provide either four additional GbE PoE ports to connect and power additional Ethernet connected devices or a modem expansion slot and four additional standard GbE ports for carrier diversity and the ability to add additional connected devices.

RX30-MC Product Page
RX30-PoE Product Page
Quick Start Guide

Notice: All specifications subject to change without notice.

Hardware Specifications

    SPECIFICATION

    RX30-POE

    RX30-MC

    Technology:

    RX30-PoE Managed Accessory — PoE Switch

    RX30-MC Managed Accessory — Modem & Switch

    Ethernet:

    4 x GbE RJ45 (LAN/WAN switchable)

    4 x GbE RJ45 (LAN/WAN switchable)

    PoE:

    4 x PoE 802.3bt Type 3 (up to 60 W per port)

    • 60 W total PoE power budget

    N/A

    Expansion:
    • 1 x 6-pin GPIO connector
      • 2x3 Molex micro-fit (3 mm locking type)
    • 1 x 6-pin GPIO connector
      • 2x3 Molex micro-fit (3 mm locking type)
    • 1 x MC400 Modular Modem slot (Peak throughput: 300 Mbps)

    ENVIRONMENTAL

    Temperature:
    • Operating: -30 °C to 70 °C
      (-22 °F to 158 °F)
    • Storage: -40 °C to 85 °C
      (-40 °F to 185 °F)
    • Operating: -30 °C to 70 °C
      (-22 °F to 158 °F)
    • Storage: -40 °C to 85 °C
      (-40 °F to 185 °F)

    Humidity:
    • Operating: 10% to 90%
    • Storage: 5% to 95%
    • Operating: 10% to 90%
    • Storage: 5% to 95%

    Ingress Protection:

    IP64 (dust tight and splashing water)

    IP64 (dust tight and splashing water)

    POWER

    Required:

    DC input steady state voltage range: 9–36 VDC (requires in-line fuse for vehicle installations)

    • For 9–24 VDC installations, use a 10 A fuse
    • For > 24 VDC installations, use a 5 A fuse
    • Connector type: 6-pin (2x3) Molex Micro-fit External Power Connector
    • Reverse polarity and transient voltage protection per ISO 7637-2

    DC input steady state voltage range: 9–36 VDC (requires in-line fuse for vehicle installations)

    • For 9–24 VDC installations, use a 10 A fuse
    • For > 24 VDC installations, use a 5 A fuse
    • Connector type: 6-pin (2x3) Molex Micro-fit External Power Connector
    • Reverse polarity and transient voltage protection per ISO 7637-2

    Consumption:

    R1900-5GB + RX30 12V input, 25 °C (77 °F) ambient temperature

    • Sleep: 0.07 W†
    • Idle: 14 W†
    • Typical: 21 W†
    • Heavy: 23 W†

    R1900-5GB + RX30 12V input, 25 °C (77 °F) ambient temperature

    • Sleep: 0.07 W
    • Idle: 21 W
    • Typical: 27 W
    • Heavy: 31 W

    PHYSICAL

    Weight: 

    0.84 kg (1 lb 13.5 oz)

    0.84 kg (1 lb 13.5 oz)

    Size:

    173 x 152 x 30 mm (6.81 x 5.98 x 1.18 in)

    173 x 152 x 30 mm (6.81 x 5.98 x 1.18 in)

    RELIABILITY

    Calculated MTBF:

    1,231,708 hours  (Telcordia SR332 at 25 °C)

    2,697,409 hours  (Telcordia SR332 at 25 °C)

    CERTIFICATIONS

    Safety:
    • UL/cUL
    • CB Scheme
    • EN 60950-1
    • EN 62368-1 
    • UL/cUL
    • CB Scheme
    • EN 60950-1
    • EN 62368-1

    Vehicle:

    E-Mark

    E-Mark

    Rail:
    • EN 50121-3-2 (Power Surge 0.5 & 1 kV Criteria A; 1.5 kV Criteria C)
    • EN 50155 Class S1
    • EN 50121-3-2 (Power Surge 0.5 & 1 kV Criteria A; 1.5 kV Criteria C)
    • EN 50155 Class S1

    Materials:
    • WEEE
    • RoHS
    • REACH
    • California Prop 65
    • WEEE
    • RoHS
    • REACH
    • California Prop 65

    Shock/Vibration/Humidity:

    MIL STD 810G and SAE J1455

    MIL STD 810G and SAE J1455

    COMPATIBILITY

    Supported Routers:

    R1900 Series 5G Ruggedized Router

    R1900 Series 5G Ruggedized Router

    Refer to the RX30 Managed Accessory Quick Start Guide.
    †Numbers shown are the minimum PoE power draw at each load but can go up an additional 60 W based on the attached PoE devices.

    Physical Measurements

    RX30-MC & RX30-PoE Models

    Features

    Ordering Guide

    The RX30 Managed Accessories are designed for the R1900 Series Router. Activation and use of the RX30-MC or RX30-PoE requires a Cradlepoint R1900 Series Router that is licensed to a NetCloud Service Plan. For details on the features available to a licensed Cradlepoint router by service plan, refer to the summary on the NetCloud Service webpage and the detail in the NetCloud Service features document: cradlepoint.com/netcloud-service

    NetCloud Packages for the RX30 Managed Accessories

      REGION

      PART NUMBER

      All Regions:

      RX30 Managed Accessory — PoE Switch

       

      RX30 Managed Accessory — Modem & Switch

      MB-RX30-POE

       

      MB-RX30-MC
      Accessories

        INCLUDED

        PART NUMBER

        RX30 Managed Accessory

        GPIO & Power Cable, 2x3, 3 meters, 18AWG

        170858-000

        Small Accessories Kit

        N/A

        Mounting Template

        N/A

        OPTIONAL

        PART NUMBER

        Power Supply, 12V, Small, 2x3 (C13 line cord not include), -30 °C to 70 °C 

        170870-000

        Rail Safe GPIO Cable, Small 2x3, Black, 3 meters, 18AWG

        170872-000
        Support & Warranty

        The RX30-PoE and RX30-MC are sold only as optional accessories. All Cradlepoint hardware products are covered by a limited lifetime warranty for as long as they have a subscription license to an active NetCloud Service Plan.

        Find the most up-to-date information at cradlepoint.com/rx30-poe and cradlepoint.com/rx30-mc.